ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
31
ZI-MOS40V-AKKU
14.2
Maintenance plan
After each workshift:
•
Check the cutting tools (tight fit, damage)
•
Cleaning the cutting tools
Once a month:
•
Overall cleaning of the machine
14.3 Cleaning
Once a month the machine and all its parts must be thoroughly cleaned.
N O T I C E
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
•
Clean the outer parts with a damp sponge.
•
Never clean the electronic parts with water!
•
Check the bottom of the machine (cutting blade area and wheels) and remove the
deposits and / or residues with a brush
•
Clean the outside (ventilation slots, ...) of the charging station.
14.4 Storage
•
Clean thoroughly all components before storage.
•
Store all components separately in a dry area at not less than -10 ° C.
•
Charge the battery fully before storing.
•
Store battery and charger separately from the machine
14.5
Disposal
Do not dispose the machine and the battery in residual waste. Contact your local authorities
for information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
