Get more from your Zip NVR with our Free CCTV tips at
ZipNVR.com
5
Anti-vandal Deep Bases
Wall & Ceiling Mounting
Pole & Wall Bracket Mounting
1
First you’ll need to fix the camera to the base as
shown in “
Wall & Ceiling Mounting
” steps 2 and 3.
Before you start
remove the upper
housing as shown in
“
Mounting
” step 1.
The anti-vandal deep bases
offer extra room for easy
termination and to disguise
cabling and connections
for a neat finish.
They are designed for use
with the IP-CAM530/353
anti-vandal domes so they
fit perfectly.
Code:
IP-BASE002B
(Black)
Code:
IP-BASE002W
(White)
A practical way to get the
ideal viewing angle. As well
as a wall bracket there are
200mm, 300mm and 500mm
ceiling brackets available.
Code:
IP-BRKT005B
(Wall)
Code:
IP-BRKT005W
(Wall)
Code:
IP-BRKT250B
(200mm)
Code:
IP-BRKT250W
(200mm)
Code:
IP-BRKT350B
(300mm)
Code:
IP-BRKT350W
(300mm)
Code:
IP-BRKT550B
(500mm)
Code:
IP-BRKT550W
(500mm)
3
Tighten the three
Torx screws in the
upper housing
(Torx key supplied).
x3
1
Screw through
the four holes in
the bottom of the
base and into the
mounting surface
using the screws
and wall plugs
provided.
Mark the fixing holes on
the mounting surface.
Drill and insert the four
anchor bolts provided.
With the bracket over
the anchor bolts, place
a washers, split ring
and then screw a nut
on to each exposed
thread to secure.
2
Screw the deep base
on to the end of the
ceiling/wall bracket.
Lock the base in-place
using the small slotted
grubs screws supplied.
When ceiling mounting
the mounting plates
is attached to the
opposite end of the
pole in the same way.
x4
x4
2
Screw through the
camera’s base and
into the deep base
using the short flat
screws provided.
x4
