Get more from your Zip NVR with our Free CCTV tips at
ZipNVR.com
13
Universal Deep Bases
Wall & Ceiling Mounting
Pole & Wall Bracket Mounting
1
First you’ll need to fix the camera to the base as
shown in “
Wall & Ceiling Mounting
” steps 2 and 3.
The universal deep bases
offer extra room for easy
termination and to disguise
cabling and connections
for a neat finish.
They are designed for
use with most of the Zip
range so you know it’ll be
a prefect fit.
Code:
IP-BASE001B
(Black)
Code:
IP-BASE001W
(White)
A practical way to get the
ideal viewing angle. As well
as a wall bracket there are
200mm, 300mm and 500mm
ceiling brackets available.
Code:
IP-BRKT001B
(Wall)
Code:
IP-BRKT001W
(Wall)
Code:
IP-BRKT200B
(200mm)
Code:
IP-BRKT200W
(200mm)
Code:
IP-BRKT300B
(300mm)
Code:
IP-BRKT300W
(300mm)
Code:
IP-BRKT500B
(500mm)
Code:
IP-BRKT500W
(500mm)
3
Fix the camera to
the deep base as
described on the
opposite page.
Mark the fixing holes on
the mounting surface.
Drill and insert the four
anchor bolts provided.
With the bracket over
the anchor bolts, place
a washers, split ring
and then screw a nut
on to each exposed
thread to secure.
2
Screw the deep base
on to the end of the
ceiling/wall bracket.
Lock the base in-place
using the small slotted
grubs screws supplied.
When ceiling mounting
the mounting plates
is attached to the
opposite end of the
pole in the same way.
1
Screw through
the four holes in
the bottom of the
base and into the
mounting surface
using the screws
and wall plugs
provided.
x4
x4
x4
2
Thread the camera’s
cable through the
lid and through the
deep base. Screw
lid to the deep
base using the Hex
screws and Allen
key supplied with
the base.
