19
Installation instructions & user manual
9120-25693 v3.00 Oct 2018 - ZIP CEX
Technical support
Tel: 0345 6 005 005 email: [email protected] www.zipwater.co.uk
OPERATION
Note: By activation of the temperature limit also
the programme keys are affected. Therefore,
the fixed values of the programme keys must
be checked after changing the temperature
limitation.
+
Press
≥ 3 sek
1
2
Temperature limit off
Confirmation
of deactivation
Reset to factory setting
+
Reset
1
Press + hold!
Reset
completed
3
2
How to save energy
The symbol
shows that the appliance works in an energy saving mode (i.e. the
momentary energy consumption is subject to the selected temperature and to the flow
rate in the energy saving mode.
ECO mode
Power limit
Power limit
All factory settings can be recalled:
• Press and simultaneously. The display now
counts backwards from “
10
“ to “
00
“ in second
intervals. The appliance is reset at value “
00
“
• Stop pressing the keys prior to this to cancel the
process.
Set the exact temperature on the appliance and open the hot water tap. If the water
feels too hot, do not add any cold water, instead, enter a lower temperature on the
appliance. If you were to add cold water, the water already heated would cool down
again and valuable energy would be wasted. Moreover, the cold water added in the
tap is not covered by the control range of the electronic circuitry, with the result that a
constant temperature is no longer guaranteed.
• If the maximum power available from the
appliance is insufficient to heat the volume of hot
water being drawn off to the required temperature
this will be indicated by “MAX” on the display.
• Reducing the flow rate will enable the required
temperature to be delivered.
