18
Installation instructions & user guide
T210055 HC05T120 installation instructions & user guide v1.00 May 2022
SECTION 7 Commissioning and operation
7.1 Switch on & commissioning
• Secure all pipes and cables.
• Turn on the mains water supply and check
for leaks.
• Switch on the mains power supply.
• All HydroChill models must be sanitised
during the commission process, please
contact Zip on 0345 6 005 005 to book a
commissioning service.
• If your appliance is left idle before use,
for water taste and quality reasons,
any non-use of more than 48 hours,
we recommend a system flush be
performed.
• On first use after a period of non-use,
run the chilled function for 60 seconds
to flush the filter and system. Not flushing the system may affect the
water quality. If taste or water quality issues persist, a filter change and
sanitisation may be required.
• Due to the factory sanitisation process, residue from the sanitisation liquid
might remain in the appliance, which requires the appliance to be flushed
with fresh water at installation. So the first few glasses of water may look
soapy with presence of bubbles.
• As part of the sanitising process press the tap lever to flush the filter
through with 10 litres of water before first use.
• Check that the water is clear, and that there are no soapy looking bubbles
in the dispensed water.
