13
Installation instructions & user guide
T210055 HC05T120 installation instructions & user guide v1.00 May 2022
SECTION 6 Installing the appliance
!
!
Use instructions supplied with the individual system components.
Valves and fittings must be sealed with PTFE
tape if compression seals are not included.
6.5 Connect the water supply
!
!
Water supply pressure range 2 - 3.5 bar.
If the mains water pressure is below 2 bar a fault could arise.
If the mains water pressure exceeds 3 bar a suitable water pressure
reducing valve must be fitted.
Zip cannot be held responsible for any appliance malfunction if the water
pressure is not within the range stated. If in doubt, consult your water
supply company.
2. Pull pipe
out
1. Press collet
down
Insert
Remove
2. Push pipe to
end stop
1. Cut pipe
clean & square
6.4 Push fit best practice
!
!
Always use new pipes, fittings and connectors when installing the
appliance.
