Installation instructions & user manual
804546UK V2.06 Oct 2018 - Zip Hydroboil Plus
Technical support
Tel: 0345 6 005 005 Email: [email protected] www.zipwater.co.uk
Tap operation
Tap Operation
Safety lock
Zip Hydroboil Plus has a unique safety device designed to reduce the incidence of accidental operation of the tap.
The tap can be “Locked” to prevent the Hydroboil Plus from dispensing boiling water.
In order to “lock” the tap, ensure the safety button is protruding from the right hand side of the control panel and the
locked indicator is illuminated.
This can be achieved by pressing the button and simultaneously rotating it until the groove in the head of the button
faces toward the body of the appliance. In this position an internal spring will push the button out. Once the button
is in the extended position, the tap will be “Locked” and unable to dispense hot water.
Disengage safety feature:
Press and simultaneously rotate (aprox. 90 degrees) the safety button on the right hand side of the control panel,
until it latches in the closed position, and the unlocked indicator is illuminated.
The unit is now capable of dispensing boiling water without the safety feature.
To dispense boiling water
Zip Hydroboil Plus is fitted with a safety, two-way cool-touch safety tap for instant boiling water.
Normal operation
(for filling cups and small containers).
To activate the tap, press the safety button (if locked) on the right side of the control panel and while holding the
button in, gently push the lower end of the tap paddle inwards and boiling water will flow until the tap paddle is
released. Without the lock activated just gently push the tap paddle and release when finished.
Continuous operation
(for filling, tea pots, saucepans and large containers).
Press the safety button (if locked) on the right side of the control panel and while holding the button in, lift the tap
paddle until it locks into a horizontal position, the button can now be released and boiling water will flow until the
paddle is returned to its normal vertical position. This operation allows a vessel to be filled without holding your hand
where it may be affected by steam.
Without the lock activated just lift the tap paddle until it locks into place, return paddle to normal position to stop
water flow.
Dispensed water
Lift for continuous dispense
Press and hold for finger controlled dispense
Locked
Press to
unlock
Safety lock
!
