Page 16 of 20
804052UK - Residential chilled and sparkling installation instructions - Sept 2016 - v3.02
The HydroTap
®
G4 is now ready to be commissioned.
•
Turn on the power, gas and water and check for any leaks.
•
Familiarise yourself with the operation of the HydroTap
®
G4 in preparation for use (see user manual).
•
Follow the installation instructions below (and review section C of the user manual).
•
After commissioning, the system may be customised by selecting further options in section G -
Settings, of the user manual.
Section 4
Commissioning
Commissioning
•
Press the [MENU] button for main menu.
•
Press the [Install] button.
•
Press the [Purge CO] button.
•
In the next screen, press the [START]
button to commence the purging process.
•
You will hear the CO
2
gas running through
the tap.
•
Run for 10 seconds to fully purge the CO
2
.
•
Press the [STOP] button to stop the purge.
•
Press [Next] for filter flush screen.
4.2 - CO
2
purge
4.1 - Select the language
Initial commissioning screen
Language selection screen
Zip BC Sparkling
Zip BC Sparkling
