Page 9 of 12
81585UK Zip Chillmaster - Installation & operating instructions - Mar 2016 v1.05
Service
Cleaning
Cleaning
Never use strong, corrosive or abrasive cleaning materials.
Wipe clean the outer surfaces with a sponge or a soft cloth using
a mild soap and water.
The basin is made of stainless steel that will show scratches if
an abrasive cleaning product is used.
The louvres on the sides need to be kept free of dust and lint
to permit free flow of air throughout the vents. They should be
checked regularly, at least monthly, and dusted or vacuumed.
There are no user serviceable parts but there are dangerous voltages present within the appliance. All service work must
only be carried out by suitably qualified and experience service personnel.
Before calling for service, check that both the water and electricity supplies are turned ‘ON’ and functional.
Call an electrician, a plumber, or Zip customer service for assistance, service, spare parts, or enquiries.
Zip customer service 0845 600 5005 or 0345 6 005 005.
2. Rotate
1. Insert
Filter replacement
continued
Inserting the new filter
• Write the date of replacement on the new filter cartridge label.
• Remove the protective plastic cap. The insertion method is the opposite to the
removal method. Align the tabs of the replacement cartridge with the filter head
and insert it up into the filter head.
• Turn the replacement cartridge a quarter turn anti-clockwise until it stops and
locks into position.
• When the filter replacement has been completed purge the system of
trapped air by dispensing water from the tap until it flows without any further
spluttering. Run the water for at least 2 minutes more to complete the purge.
