Page 4 of 8
Zip Filter Tap - Installation & Operating Instructions - 82232 - January 2012 v1.01
The filter
and
tubing are full of air until purged, and the filter cartridge requires activation when first installed.
2. Flip up the operating lever on the Filter Tap for a minimum of five minutes until all of the air has been purged from the
system, and the cartridge has time to become fully activated.
Every time the filter cartridge is replaced, repeat this procedure of a five minute flush to activate the new cartridge
properly.
NOTE:
When flushing the system, some black particles may be released into the water. This is normal. The water will
become clear after the first few litres.
Complete the installation
Leave these instructions with client.
Installation Instructions ctd
Problem
Cause Remedy
No water at outlets
Water not connected
Connect and turn on water
Poor flow at outlet
Blocked filter
Replace filter
Troubleshooting
Pos.B
( Alternative outlet )
Pos. A
3/4” FBSP
1/2” FBSP
Filter and sealing
washer
Service valve
Water Inlet
To filter
