22
Quick Start Installation Guide
807118 v1.06 10.22 G5 BC Quick Start Guide
Quick Start Installation Guide
807118 v1.06 10.22 G5 BC Quick Start Guide
23
SECTION 12: Commissioning
SECTION 12: Commissioning
12. Commissioning the HydroTap using the HydroTap Clean can
12:12 PM
COMMISSIONING
Rev
024-H5v0.1.16
Mod
BCS100
S/N
0000000000000
P/N
H50063000AU
HydroTap G5
Language
LANGUAGE
10:50
Imperial
Metric
Units :
English
• Initial commissioning screen touch
Language option.
• Touch the appropriate button to select
the language and units of choice.
• Touch the back arrow to go back to
previous menu.
• In the previous menu, touch the arrow to
begin the commissioning process.
COMMISSIONING
12:12 PM
Return to previous commissioning step ?
NO
YES
• Optional screen shown if the
commissioning was previously started but
not complete (Command Centre powered
off during process). Otherwise screen will
not be shown.
COMMISSIONING
12:12 PM
Your HydroTap is designed to be used frequently,
do not commission until ready for use.
Read the instructions before proceeding.
Remove dust cap from filter and keep. Install filter.
• Read the commissioning information,
touch the forward arrow to go to the next
screen.
• (Touch the back arrow to go back to
previous menu).
12.2 Select the language
12.1 Turn on the supplies & familiarise yourself with the system
• Connect the mains electrical power cable to the supply.
• Turn the power and water on and check for any leaks.
• Familiarise yourself with the operation of the tap and GUI screen in
preparation for use, see the user guide.
Parts supplied with the HydroTap Clean kit
Qty
HydroTap Clean can adapter (1) (used in filter head)
1
HydroTap Clean can (2)
1
HydroTap Clean instructions
1
Parts identification
HydroTap Clean
Gently cleans for pure tasting water
ORGANIC AND pH-NEUTRAL
HydroTap Clean
can (2)
HydroTap Clean
adapter (1)
!
!
WARNING ! Do not connect the parts together before
carefully reading/following instructions.
HydroTap Clean
instructions
HydroTap Clean is a first to market cleaning process for HydroTap systems
comprised of the HydroTap Clean solution, dosing adaptor and smart
firmware. The HydroTap Clean process is automated and gently cleans
the chilled and sparkling water paths during the commissioning of a new
HydroTap Command Centre.
The HydroTap Clean solution is:
Safe, natural, certified organic, PH neutral, biodegradable solution produced
by electrochemically activated water acting like a detergent.
HydroTap Clean is also non-corrosive to gently clean the chilled and sparkling
internal water paths of your new HydroTap.
The HydroTap Clean process
Parts supplied
