Product Description
ILH 6 & 9
is a pressure-type, hydraulically controlled instantaneous water
heater for supplying hot water at one or two outlets in close proximity to one
another. (see typical application chart).
ILX6 - 12
is a flow-type electronically controlled instantaneous water heater for
supplying hot water at one or two outlets situated in close proximity to one
another. (See typical application chart).
Typical Applications
ILH6
Wash-hand basin
ILH9
Two wash-hand basins (not simultaneously) or kitchen sink
ILX6
Wash-hand basin
ILX9
Two wash-hand basins (not simultaneously) or kitchen sink or
shower and basin (not simultaneously)
ILX12
Two wash-hand basins or large kitchen sink or shower and basin
Approvals
The ILH6, ILH9, ILX6, ILX9 & ILX12 have been examined, tested, and found,
when correctly fitted, to comply with the requirements of the United Kingdom
Water Regulations/ Byelaws (Scotland). The product, therefore, is listed under
the WRAS (Water Regulations Advisory Scheme) Water Fitting and Materials
Directory -
Certificate No. 0209074 (ILH6/9) No.0209073 (ILX6/9/12)
.
The ILH6, ILH9, ILX6, ILX9 & ILX12 are CE endorsed.
Warranty
Your Zip InLine is precision-built from the finest materials available and should
give many years of trouble-free service. Zip Heater (UK) Ltd warrants that,
should any part of the heater fail within 12 months of installation, that part or
parts will be repaired or replaced by Zip Heaters (UK) Ltd or its accredited
distributor or service engineer, free of charge, except as set out below,
provided that the failure is not due to incorrect use, incorrect installation, dirt in
the inlet or outlet pipes, non-compliance with operating instructions, condition
of water used or unauthorised modification of the heater.
ILH6, ILH9, ILX6, ILX9 & ILX12 Installation Instructions 1
