X10 Broadband Router Use’s Guide
24
Figure 4-13
z
Predefined Trigger Rules:
You can select one of the predefined rules.
z
Rule Name:
Enter any name you want to use for the Application Name.
z
Trigger Protocol:
Select whether the outbound port protocol is “TCP”, “UDP”
z
Trigger Port:
This is the out going (Outbound) range of port numbers for this
particular application.
NOTE:
Individual port numbers are separated by a comma (e.g. 47824, 5776, 6581 etc.).
To input a port range use a “dash” to separate the two port number range (e.g.
3300-3800)
z
Forward Protocol:
Enter the In-coming (Inbound) port or port range for this type
of application (e.g. 2300-2400, 47624).
NOTE:
Individual port numbers are separated by a comma (e.g. 47824, 5776, 6581 etc.).
z
Forward Port:
Select the Inbound port protocol type: “TCP”, “UDP”.
z
Current Trigger-Port Table:
This display shows the valid Trigger Rules in
Broadband Router. User can view the information about Virtual Server’s Table.
Fill in the “Rule Name”, “Trigger Protocol”, "Trigger Port", " Forward Protocol”, and
“Forward Port” of the setting to be added and then click "Add". Then this Special
Application setting will be added into the "Current Trigger-Port Table" below.
If you want to remove some Special Application settings from the " Current
Trigger-Port Table", select the Special Application settings you want to remove in the
table and then click "Delete ".
Содержание X10
Страница 1: ...X10 4port Broadband Router ...