X10 Broadband Router Use’s Guide
23
and expose it to the outside network. Outside user can browse inside web server
directly while it is protected by NAT.
Figure 4-12
z
Rule Name:
The description of this setting.
z
Internal Server IP Address:
This is the LAN client/host IP address that the
Public Port number packet will be sent to.
z
Protocol:
Select the protocol type (TCP, UDP, FTP, HTTP).
z
External Port:
This is the port number (of the above Private IP host) that the
below Public Port number will be changed to when the packet enters your LAN
(to the LAN Server/Client IP).
z
Internet Port:
Enter the service (service/Internet application) port number from
the Internet that will be re-directed to the above Private IP address host in your
LAN. Click "Add" button after enter the all fields to add the rule.
z
Current Virtual Server Table:
This display shows the valid virtual Servers in
Broadband Router. User can view the information about Virtual Server’s Table.
Fill in the “Rule Name”, “Internet Server IP Address”, " Protocol ", " External Port”,
and “Internet Port” of the setting to be added and then click "Add". Then this Special
Application setting will be added into the "Current Virtual Server Table" below.
If you want to remove some Special Application settings from the "Current Virtual
Server Table", select the Special Application settings you want to remove in the table
and then click "Delete ".
When finished making your changes on this screen, click the Save button to save
these changes.
4.5.4 Port Triggering
The Port Triggering screen allows the Router to watch outgoing data for specific port
numbers. The IP address of the computer that sends the matching data is
remembered by the Router, so that when the requested data returns through the
Router, the data is pulled back to the proper computer by way of IP address and port
mapping rules.
Содержание X10
Страница 1: ...X10 4port Broadband Router ...