Zio WLB5254AIP, Руководство пользователя

Страница: 66 / 69

X11 Wireless Broadband Router User manual
Page 66 of 69
Appendix
Ⅰ
: Troubleshooting
1. I cannot access the Web-based Configuration Utility from the
Ethernet computer used to configure the router.
z
Check that the LAN LED is on. If the LED is not on, verify that the cable for
the LAN connection is firmly connected.
z
Check whether the computer resides on the same subnet with the router’s
LAN IP address.
z
If the computer acts as a DHCP client, check whether the computer has
been assigned an IP address from the DHCP server. If not, you will need to
renew the IP address.
z
Use the ping command to ping the router’s LAN IP address to verify the
connection.
z
Make sure your browser is not configured to use a proxy server.
z
Check that the IP address you entered is correct. If the router’s LAN IP
address has been changed, you should enter the reassigned IP address
instead.
2. I forget Password (Reset the Router without Login)
z
Plug out the power of the Router.
z
Use a pencil to press and hold the default button on the back panel of the
Router. Plug in the power of the Router.
z
Press and hold the default button wait for a few seconds until the CPU LED
indicator stays green.
z
Reboot the AP.
z
After the above those steps, the manufacture’s parameters will be restored
in the Router. The default password is N/A.
3. I have some problems related to Connection with Cable
Modem please follow the following steps to check the problems:
z
Check whether the DSL modem works well or the signal is stable. Normally
there will be some indicator lights on the modem, users can check whether
the signal is ok or the modem works well from those lights. If not, please
contact the ISP.
z
Check the front panel of the Router, there are also some indicator lights
there. When the physical connection is correct, the Power light and the CPU