Zinwell ZW-N5800S, Руководство пользователя

Страница: 26 / 35

26
In the Station list, the information of associated clients is displayed.
Firewall
MAC/IP/Port Filtering Settings
You can setup the filter to block the malicious traffic from Internet or local area network.
Basic Settings
Item
Description
MAC/IP/Port Filtering Enable or Disable the filtering. When enable the setting, all
the traffic flow from WAN to LAN will apply to the rules
below.
Default Policy The packet that don’t match with any rules would be:
“Accepted/Dropped”. Select “Accepted” and only the rule
matching traffic can pass through this device. Select
“Dropped” and the rule matching traffic will be dropped.
MAC/IP/Port Filter Settings
Item
Description
MAC Address This is the MAC Address applying to this rule.
Dest. IP Address
This is the range of the destination IP Address.
Source IP Address
This is the range of the source IP Address.
Protocol
Select one protocol to apply to this rule. The available
options are “None, TCP, UDP and ICMP”.
Dest. Port Range
This is the range of the destination port.
Source Port Range
This is the range of the source port.
Action
This is the policy of this rule. The available options are
“Drop and Accept”.
Comment
You can add your note for this rule.
Current MAC/IP/Port filtering rules in system:
The current configured rules are listed it this table. To delete a rule, check the box in
front of the rule and click “Delete Selected” button.