Zinwell ZW-N5800S, Руководство пользователя

Страница: 10 / 35

10
Knowing the Network Application
The device is a WLAN Access Point and also a Network Address Translator (residential
gateway/router). The WLAN stations (Client) can connect to this device and then go
through the Internet.
Router mode:
The wired Ethernet (WAN) port is used to connect with ADSL/Cable modem and the
wireless NIC is used for your private WLAN. The other wired Ethernet (LAN) port bridges
to the private WLAN. The NAT is existed between WAN and WLAN/LAN and all the
wireless and wired clients share the same public IP address through the WAN port to ISP.
The default IP configuration for WAN port is static IP. You can access the web server of
device through the default WAN IP address 172.1.1.1 and modify the setting base on
your ISP requirement.
Ch 3. Detail Configuration
TCP/IP Settings
Configuring WAN Interface
The device supports four kinds of IP configuration for WAN interface, including Static IP,
DHCP Client, PPPoE and PPTP/L2TP. You can select one of the WAN Access Types
depend on your ISP required. The default WAN Access Type is “Static IP”.
Static IP
You can get the IP configuration data of Static-IP from your ISP. You will need to fill the
fields of IP address, subnet mask, gateway address, and one of the DNS addresses.
Item
Description
IP Address:
The Internet Protocol (IP) address of WAN interface provided by
your ISP or MIS. The address will be your network identifier
besides your local network.
Subnet Mask:
The number used to identify the IP subnet network, indicating
whether the IP address can be recognized on the LAN or if it
must be reached through a gateway.