Zinwell ZP-320, Руководство пользователя

Страница: 18 / 20

18
Maintenance
Reset the device
You can press “MENU” to open the setup menu. To Reset the device, navigate to Setup menu and
select “Restore Default” and press “ENTER”. Please refer to setup section for the details.
Power on/Standby time
The device needs sometime to power on. The time costs are listed below.
Plug in the power -> power on and ready to use: it takes about 15 seconds.
Power on status -> Standby mode by pressing the power button: it takes about 15 seconds.
Standby mode -> power on mode by pressing the power button: it takes about 8 seconds.
In this short time, the remote control unit and the power button are not functional.
Battery
When the distance of remote control is dropped dramatically, please replace the new battery for the
remote control.
Black screen
If you get black screen while starting to play Movie or Photo files, please check the connection from
TV to the device. If the HD output is enabled, the video connection should be component YPbPr. In
case of not connecting YPbPr but CVBS, you can press “MENU” button to open the menu. It should
show menu picture via CVBS, so you should be able to see the setup menu. Then select Video, HD
output to turn off the HD output.
Connect DVI to HDMI converter
When using the DVI to HDMI converter to
connect the player, some LCD monitors could
only accept the SD video. This player detects
the support format of the LCD player and locks
the HD option if the monitor doesn’t support it.
In this case, the player output SD video to the
monitor.