NextGen TV Box
| Installation and Description Guide | 7
Programming:
1. Press and hold the black ” TV POWER" button for 3
seconds until the red LED changes from flashing to solid.
The solid red LED indicates the remote control is in
learning mode.
2. Once in learning mode, press and release one of the six
learning keys to be programmed. The indicator light will
change from solid to slow flashing.
3. Point the front of the TV remote control at the front of the
Zinwell remote (about 1~2in). Then press and hold any
button on the TV remote control to be learned by the
Zinwell remote. After the signal is learned, the indicator
light will flash 3 times quickly then you can release the
button.
4. Press OK button of the Zinwell remote to save
programming.
** Repeat steps 2, 3 and 4 to learn other keys in the TV area.
Press OK button of the Zinwell remote to save programming.
NOTE:
1. During the learning process, if you wait for more
than 10 seconds at any time, it will automatically
exit the learning mode.
2. During the learning process, press any button
other than the six learning keys to exit the
learning mode.
3. Keep the two remote controls steady when
pointed at each other during the learning process.
Red LED Feedback:
1. Solid LED: Remote is in learning
mode, awaiting a key to be
selected for programming.
2. Slow Flashing LED: Remote is
awaiting from TV remote
control.
3. LED flashes 3 times: Learning
is successful.
The remote is capable of controlling up to six basic functions of most TVs and
audio devices (volume, mute, power, input). Use the instructions below for
programming the six designated learning keys to operate your TV or audio device.
Learning Keys:
TV Remote Control
about 1~2in
Programming the Remote Control
