2
O
RDERING INFORMATION
This PLC Device user manual describes
Powerline to Ethernet Bridge
and
Powerline to Ethernet Switch
devices. PLC stands for Powerline
Communication.
The
Powerline to Ethernet Bridge
device converts the Ethernet packets from its
Ethernet port to the Powerline Communication packets (PLC packets), which then
run on home electrical power lines, and converts the PLC packets back to Ethernet
packets.
The
Powerline Ethernet Switch
device is a four-port Ethernet Switch device
bridged together with the Powerline communication interface. It converts the
Ethernet packets from any of its Ethernet port to PLC packets, and from PLC
packets back to Ethernet packets. Also, Ethernet packets between any two of the
four Ethernet ports are communicable, just like a normal Ethernet switch.
See the following table for a summary.
Categories
Description
Powerline Ethernet Bridge
It sends any packets from its Ethernet port
to the Ethernet port of the other
Powerline
Ethernet Bridge
. It converts from Ethernet
packets to be transmitted via home electric
wires to the other PLC device.
Powerline Ethernet Switch
The
Powerline Ethernet Switch
device
sends any packet from any of its Ethernet
port to the other three Ethernet ports of
itself, or to the Ethernet port of a remote
Powerline Ethernet Bridge
device.
