Zinstall User Guide
18
262
General error
Troubleshooting:
1.
Perform a CHKDSK - hard drive consistency check - on the hard drive of the old
computer
2.
Make sure there are no firewall/antivirus/security software installed / running on
3.
Restart both the old and the new computers
4.
Then run the migration again
276
Incompatible Windows mode
Restart the TARGET computer.
Right click the Zinstall tray icon, choose
Switch to Old Desktop
, and
wait for fine tuning
procedure to finish.
Once it is finished, the migration has completed successfully.
328
VSS warning
To troubleshoot, see Message 254 (above)
298
One or more of the partitions on the old computer’s hard drive are formatted
using the FAT32 file system
For a reliable transfer, FAT32 partitions should be upgraded to the NTFS file system.
Troubleshooting:
Please do the following for each of the partitions mentioned in the message you have
seen.
9.
Open a command prompt by going to Start Menu -> All Programs -> Accessories ->
Command Prompt
10.
In the command prompt, type the following command and press enter:
convert c: /FS:NTFS
11.
If you are asked to provide a "volume label", type in the label the drive has as seen in
My Computer. For example, if My Computer has "Drive C: [My Drive]", you need to
type in "My Drive".
12.
Answer YES to question about “volume in use, do you wish to force?”
13.
Answer YES to question about “system volume, schedule for next boot?”
14.
Restart your computer
15.
When windows begins to start , let it do a disk check (it will show the message “the
type of the file system is FAT, press any key to cancel disk check” - do NOT press any
key at this stage )
16.
Once a disk check is done, conversion to NTFS will begin. This may take some time,
please wait for it to finish
17.
Once the conversion is finished, Windows will reboot itself once more.
Your file system is now upgraded to NTFS.
Содержание Zinstall HDD
Страница 1: ...Zinstall HDD User Guide ...
