
Battery Installation, Removal, and the
Battery Lock
Install the battery with the Charging Port on the right
using the two motions indicated by arrows 1 and 2 in the
photo. Make sure that the battery is completely in and that
the keyed lock latches it down. The Battery Lock Key can
be removed to lock the battery into the chair for theft
prevention of the Battery but the Zinger has no key to lock
the power o
ff
. To prevent unwanted riders from zinging o
ff
on your Zinger, either lock your Zinger with a bicycle lock or
remove the battery. And always use a bicycle lock through
the lower base frame tubes when leaving your Zinger
unattended in a public place.
Checking the Tire Pressure
Your Zinger drives, steers, and brakes by engaging either
a drive roller or a steel brake pad into the rear tires. For this
reason:
IT IS IMPORTANT TO MAINTAIN YOUR REAR
TIRE PRESSURE AT 40 PSI (2.8 BAR)
. If you don’t have a
bicycle pump with a built in pressure gauge, you should get
one. Check the tire pressure weekly or anytime you feel
that the lever motion has become spongy. Low tire
pressure will compromise the Zinger’s handling. Do not
over inflate. Over inflation could cause a tire blow out.
Keep tires inflated to 40 PSI (2.8 Bar). For proper
performance, do not over or under inflate. Check
pressure weekly.
11
WARNING
!
Содержание ZR-10
Страница 8: ...7 ...
Страница 31: ...Printed in the USA 2015 Zinger Chair LLC www zingerchair com R ...