Zing PA5520 Zing MPS, Инструкция по сборке, Страница: 4 / 20

Assembly
1. Remove everything out of the box and
place the mast onto the floor as shown.
Remove all plastic wrap.
2A. If the gas spring lockout was ordered, it
will be shipped in the locked position. Pull
the lock out and turn to unlock.
2B. If the Gas Spring Lockout was not
ordered, remove the bolt from the lower
part of the cylinder on the mast as shown,
discard bolt.
3. Remove the foot pedal and bolts from the
polybag and place the foot pedal onto the
bottom of the gas spring as shown.
Line up holes and insert the 2 bolts, start
both bolts first, then tighten securely.
Page 1
22B 2A