Zing PA5520 Zing MPS, Инструкция по сборке, Страница: 11 / 20

25A. If the Zing Tilt Table (TT) was ordered,
place the bracket for the planar head
support onto the upper body support pad,
making sure the spacers are in between the
bracket and pad.
25B. Tighten bolts securely.
25A 25B
23. Start 2 bolts closest to the pads, then
start front 2 bolts. Once all bolts have been
started, tighten securely.
24A. If the optional push handle was
ordered, remove the bolts from the bracket
as shown.
24B. Tilt one side of the push handle down
to line up with the hole in the mast. Insert
bolt and place nut onto bolt. Tighten
securely. Repeat steps for the other handle.
24A 24B
Prone
Prone
23
Page 8