manualshive.com logo in svg

ZincFive UpStealth, Руководство пользователя, Страница: 19 / 33

Поделиться
Скачать
ZincFive UpStealth Скачать руководство пользователя страница 19

Relay Selection & Trigger Viewing Menu

Description:

View all 8-relay settings and select a relay to con

fi

gure.  This display is con

fi

gured as two columns, one column has the relay 

number  (under the STATUS heading) and the second column shows the Trigger for enabling the relay.  When a RELAY is enabled, 

The COM pin and the NO (normally open) Pin are connected.

On This Display:

• 

RELAY(#): Brings up the settings menu for that relay.

• 

TRIGGER: What the relay will trigger on. Values can be:

 

In the below screenshot, Relay1 is not con

fi

gured to trigger, Relay2 will trigger on a power failure.

Controls:

• 

Use the direction keys to select a relay. Press ENTER to go to the con

fi

guration screen for that relay.

• 

The screen scrolls, allowing access to all the relays. BACK will always be at the very top, and the last relay will always be at the 

very bottom.

Relay Selection and Trigger Viewing Menu Display

AC

TEMP

TIME

FLASH

BATTCAP

MULTI

UPSTEALTH® 

USER MANUAL / 

14

Содержание UpStealth


































Отзывы:

Нет отзывов