ZIMO MS450 Скачать руководство пользователя страница 49

Страница: 49 / 88

MS - SOUND decoders MS440 to MS990 and MN - NON-SOUND decoders MN170 to MN340 Page 49

Key arrangement on the ZIMO MX32:

(((((

(((((

(((((

(((((

(((((

(((((

Key arrangement on the ZIMO MX32:

(((((

(((((

(((((

(((((

(((((

(((((

= CLEAR + end: The

selection procedure

stopped

and the selection is cleared, that is,

from now on, this function key does not activate any sound.

= STORE + end:

F8 =

STORE + end: The

allocation procedure

stopped

and the last selected

function sound is stored and ready for playback when this function key is pressed.

The

allocation procedure

can also be

ended

by any other programming procedure (e.g. CV #300 = 0

or any other value or CV) or by removing power from the decoder. The “old” allocations remain active
in such cases; such “forced endings” are also useful when the “old” sound should remain as the current
sound without first having to locate it again.

The selection procedure is supported with

sound signals:

The

“cuckoo

jingle

” sounds when….

…. the last stored sound sample of a group is reached; use the appropriate key (F1, F2) to scroll in
the opposite direction to listen to the other stored sounds,

…. the last stored sound group is reached (with F4 or F5); use the appropriate key (F4 or F5) to
scroll in the opposite direction.

…. play-back attempted (with F0) but no sound sample is available,
…. a wrong key is pressed.

The

“confirmation jingle”

is played after ending the allocation procedure with F3 or F8.

Allocation of sound samples to the random generators Z1 - Z8:

MS sound decoders provide 8 simultaneously playing random sound generators. The timing of them is
determined by CV

s; see “CV table” from CV #315.

A sound sample can be added to each random generator from the pool of samples in the decoder.

The switch input

allocation procedure

is initiated with the operations mode Pseudo-Programming

CV #300 = 101

for random generator Z1

(Z1 has a special logic for the air brake pump;

therefore, it should have an air brake pump allocated)

CV #300 = 102

for random generator Z2

CV #300 = 103

for random generator Z3

etc.

Depends on entry: Z1 - Z8

The function keys have the following special

meaning during the selection procedure!

The meaning and action of the function keys is the same as for function sounds (see above):

= play: Playback

F1, F2

= prev, next: playback of previous or next sound sample

and so on...

however,

…

– standstill:

If F6 is active when ending the allocation procedure: the selected

sound sample is played as random sound at standstill (default).

= cruise:

If F7 is active when ending the allocation procedure: the selected

sound sample is played as random sound when the locomotive is moving.
(Default: no)

The allocation procedure for random sound is the same as for function sound!

Allocation of sound samples to switch inputs S1, S2 and S3:

There are 3 switch inputs available, of which two (“1” & “2”) are freely available to the user while one
(“3”) is usually reserved for a cam sensor input; which can also be used for other inputs if not used for
a cam sensor (i.e. the virtual cam sensor is used instead). These inputs can accept reed switches,
optical or hall-effect sensors and similar; see chapter 8 of the manual f

or small decoders: “Connecting

speaker, cam sensor”.

A sound sample can be allocated to each switch input, from the pool of stored samples in the decoder;
playback times can be set with the help of CVs #341, #342 and #343, see CV table.

The switch input

allocation procedure

is initiated with the operations mode Pseudo-Programming

CV #300 = 111

for switch input S1

CV #300 = 112

for switch input S2

CV #300 = 113

for switch input S3

etc.

Depends on entry: S1 - S8

The function keys have the following special

meaning during the selection procedure!

The meaning and action of the function keys is the same as for function sounds (see above):

= play: Playback

F1, F2

= prev, next: playback of previous or next sound sample

and so on...

SELECTION RANDOM
SOUND

Z2 --- SAMPLE ---

((((( play ((((( prev ((((( next

CLEAR --- CLASS ----

((((( + end ((((( prev ((((( next

----- LOOP ----- STORE

((((( still ((((( cruise (((( +

SELECTION SWITCHING
SOUND

S1 --- SAMPLE ---

((((( play ((((( prev ((((( next

CLEAR --- CLASS ----

((((( + end ((((( prev ((((( next

----- LOOP ----- STORE

((((( ((((( (((( + end

NOTE

: F6 and F7 are only effective, if the markers are included in the sound samples; basic settings

are also saved; changes take effect only if F6/F7 is actuated.

If F6 and F7 are not set, the sound sample is played back in the stored length; with shorter and with
longer activation of the F-keys.