Zimmer ZTone non-medical, Инструкция по эксплуатации, Страница: 25 / 41

25/40
2022.12.13 (Rev. 0)
[REMIFU-ZTN(EN)(NM)]
ZTone Instructions For Use
5. Operation instructions
5.1 Preparation
For hygiene reasons, the treatment area of the person’s body and the device are not in
direct contact. There is no need to undress when using this device.
Please prepare some fabric towels to be placed on the treatment area of person’s body for
hygine purpose. We recommend cotton towles or covering materials to be applied before
treatment starts.
5.2 How to Use
1. When the power switch on the back of the device is turned “ON”, the ZTone logo screen
appears momentarily as shown in the figure below and then changes to the Initial screen.
Figure 13. ZTone Logo Figure 14. ZTone Initial screen
2. Select the image of the area to be treated. Different appropriate protocols are applied
for each part of the body.
3. After selecting the desired transducer, select the level according to the frequency.
4. Select Intensity and position the transducer near the treatment site.