Zimmer Soleo Sono, Инструкция по эксплуатации, Страница: 48 / 52

Manufacturer's EMC Declaration
19
Page 39
Key features of the Soleo Sono are: interference-free delivery ultrasound, with appropriately configured
parameters and trouble-free operation of all functions.
Guidelines and manufacturer's declaration - electromagnetic immunity
The Soleo Sono device is intended for use in an electromagnetic environment, as specified below. The customer or the user
of the Soleo Sono device should ensure that it is used in such an environment.
Immunity
tests
IEC 60601 – Test
Level
Compliance level Electromagnetic environment - Guidelines
Conducted
RF
disturbance
variables in
accordance
with IEC
61000-4-6
Radiated
RF
disturbance
variables in
accordance
with IEC
61000-4-3
3 V
RMS
150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
3 V
RMS
150 kHz to 80 MHz
10 V/m
80 MHz to 2.5 GHz
Portable and mobile RF communications
equipment should not be used any closer to the
Soleo Sono including cables, than the
recommended separation distance calculated
using the equation relevant for the transmission
frequency.
Recommended separation distance:
d = 1.17 √P
d = 0.35 √P for 80MHz to 800 MHz
d = 0.7 √P for 800 MHz to 2.5 GHz
where P is the power rating of the transmitter in
watts (W) according to the transmitter
manufacturer and d is the recommended
separation distance in metres (m).
In accordance with an on-site investigation
a
,
for all frequencies, the field strength of a
stationary radio transmitter should be less than
the coincidence level
b
.
Errors may occur in the vicinity of devices
marked with the following symbol:
NOTE 1: At 80 Hz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all cases. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.