Zimmer PRO -V, Руководство пользователя

Страница: 2 / 16

www.zi mm er-instruments.com 2 | 16
Password Incorrect.
the Password entered.
Pressing the " Down" key will re-enter to
the “Enter Password” entry stage.
Pressing the “ Up” key will exit the
setup menu.
New / Change Password
Pressing the “ Down” key will scroll the value of the
first digit from 0 through to 9, the value will wrap from 9
round to 0.
Pressing the “ Up” key will advance the operation to
the next digit and set the first digit, in this case to “4”
Enter New / Change Password, first digit entered, prompting for
second digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
second digit from 0 through to 9, the value will wrap from
9 round to 0.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “1”
Enter New / Change Password, second digit entered, prompting for
third digit.
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
third digit from 0 through to 9, the value will wrap from 9
round to 0.
Pressing the “ Up” key will advance the operation to
the next digit and set the third digit, in this case to “4”
Enter New / Change Password, third digit entered, prompting
for fourth digit. (* denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
fourth digit from 0 through to 9, the value will wrap from
9 round to 0.
Pressing the “ Up” key will advance the operation to
the “New Password Confirmed” and set the fourth digit,
in this case to “1”.
(*Denotes that digit will be flashing).
New/changed Password confirmed.
Pressing the “ Down” key will re-enter to the
“New/Change Password” entry stage.
Pressing the “ Up” key will confirm New Password
selection(section3.1.2).
ON O/P1 O/P2 COM
Zimmer
PRO
-V
ON O/P1 O/P2 COM
Zimmer
PRO
-V
*
ON O/P1 O/P2 COM
Zimmer
PRO
-V
*
ON O/P1 O/P2 COM
Zimmer
PRO
-V
*
ON O/P1 O/P2 COM
Zimmer
PRO
-V
*
ON O/P1 O/P2 COM
Zimmer
PRO
-V
3.1.1.2 New/ChangePassword
Pressing the “ Down” key will scroll the value of the second digit
Pressing the “ Down” key will scroll the value of the fourth digit
Pressing the “ Down” key will scroll the value of the third digit
Pressing the “ Down” key will scroll the value of the first digit
3. Programming
Enter Password, prompt for first digit.
(*Denotes that digit will be flashing).
from 0 through to 9, the value will wrap from 9 round to 0.
In the special case where the Password is “0000” pressing
the “ Up” key when prompted for the first digit will
advance to the “Password Set/Confirmed” screen.
Enter Password, first digit entered, prompt for second digit.
(*Denotes that digit will be flashing).
from 0 through to 9, the value will wrap from 9 round to 0.
Enter Password, third digit entered, prompt for fourth digit.
Transformer parameter selection(section 3.1.2).
from 0 through to 9, the value will wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to
Enter Password, second digit entered, prompt for third digit.
(*Denotes that digit will be flashing).
from 0 through to 9, the value will wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to the
the “Password Set/Confirmed” and set the fourth digit.
Pressing “ Down” key will enter to the “New /
change Password” entry stage.(section 3.1.1.2)
Pressing the “ Up” key will advance to the Potential
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
*
ON O/P1 O/P2 COM
Zi
mme
r PRO
-V
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
*
ON O/P1 O/P2 COM
Zi
mm
er PRO
-V
the next digit and set the first digit.
Pressing the “ Up” key will advance the operation to the
next digit and set the second digit.
next digit and set the third digit.
Password Set/Confirmed.
3.1 Programming via Front LCD & Two keys
The following sections comprise step by step procedures for configuring the
Zi
mme
r PRO - V for individual user requirements.
To access the set-up screens press and hold the “ Down” and “ Up”
keys simultaneously for 5 seconds. This will take the User into the Password
Protection Entry Stage .
3.1.1. Password Protection
3.1.1.1 Password Verification
Password protection can be enabled to prevent unauthorised access to set-up
screens, by default password protection is not enabled.
Password protection is enabled by selecting a four digit number other than 0000,
setting a password of 0000 disables the password protection.
Programming of transducer can be done in three ways :
1) Programming Via Front LCD & two keys.
2) Programming Via optional RS485(MODBUS) communication port.
Pressing the “ Up” key will advance the operation to
(*Denotes that digit will be flashing).
This screen is displayed when the unit has not accepted
and advance to the Potential Transformer parameter