manualshive.com logo in svg

Zimmer MIS Multi-Reference, Хирургическая техника, Страница: 22 / 48

Поделиться
Скачать
Zimmer MIS Multi-Reference Скачать руководство пользователя страница 22

Zimmer MIS Multi-Reference 4-in-1 Femoral Instrumentation Surgical Technique

20

Using the MIS Notch/Chamfer 

Guide to downsize the femur

If there is a need to downsize the 
femur, the MIS Notch/Chamfer and 
Trochlear Guide can be used for  
sizes C-G Standard implants and the 
Notch/Chamfer Guide can be used for 
all flex sizes.

NOTE:

 Size A, B and H MIS Trochlear 

Guides cannot be used for downsizing.

Select the preferred size Notch/
Chamfer Guide and pin to the distal 
femur with two Short Spring Screws 
or 3.2mm (1/8-inch) headed screws 
(48mm length). Alternatively, insert two 
Hex Headed pins. Ensure that the guide 
is seated on the anterior and distal 
femur. Use a reciprocating saw to recut 
the sides of the intercondylar box. Use 
an oscillating saw to recut the anterior 
and posterior chamfers.

If downsizing for a CR-Flex or LPS-Flex 
implant, use the posterior surface of 
the MIS Notch/Chamfer Guide for the 
posterior cut. If downsizing for a CR 
or LPS implant, use the MIS Threaded 
Handle to attach the matching size MIS 
Trochlear Guide to the Notch/Chamfer 
Guide, and use the posterior surface 
of the MIS Trochlear Guide for the 
posterior cut.

Remove the MIS Trochlear and Notch/
Chamfer Guides.

Fig. 4aa Cut the sides and base of the 

trochlear groove

Surgeon Notes & Tips

 

•

  Although a sequence of femoral 

cuts has been provided, the cuts 
may be made in any sequence. It 
is recommended for the surgeon to 
complete the cuts in a consistent 
sequence to help ensure that all 
cuts are performed. However, the 
peg holes should be drilled prior to 
assembling the MIS Trochlear Guide.

 

•

  If the MIS Femoral Finishing Guide is 

used, the flexion gap should equal 
the extension gap.

 

•

  If the MIS Flex Femoral Finishing 

Guide is used, then the flexion gap 
will be approximately 2mm greater. 
For a Flex implant, use an MIS 
Spacer Block with the MIS Spacer 
Block Flex Adapter to check  
flexion gap.

 

•

  An oscillating saw with a narrow 

blade may also be used, or a 
reciprocating blade may be used 
to cut the sides and a chisel or 
osteotome used to cut the base of 
the notch.

 

•

  Remember that the incision can be 

moved both medial-to-lateral and 
superior-to-inferior as needed to 
gain optimal exposure.

 

•

  To facilitate the use of the mobile 

window, when resecting on the 
medial side, use retraction on 
the medial side while relaxing 
the lateral side. Likewise, when 
resecting on the lateral side, use 
retraction on the lateral side while 
relaxing the medial side.

Apply the matching size MIS Trochlear 
Guide to the MIS Notch/Chamfer Guide 
with the holes in the Trochlear Guide 
aligned with the threaded holes in the 
Notch/Chamfer Guide (Fig. 4y). Thread 
the MIS Threaded Handle through 
one of the threaded holes to secure 
the Trochlear Guide to the MIS Notch/
Chamfer Guide (Fig. 4z).

Protect the tibia. Use a reciprocating 
saw through the slots in the Trochlear 
Guide to cut the sides and base of the 
trochlear groove (Fig. 4aa). Remove 
the Trochlear Guide, and insert an 
osteotome over the resected tibial 
surface below the trochlear groove. 
Then use the reciprocating saw to finish 
the trochlear cuts.

Remove the MIS Notch/Chamfer Guide.

Fig. 4z MIS Trochlear Guide secured to  

MIS Notch/Chamfer Guide

Fig. 4y Apply the matching size MIS Trochlear 

Guide with the holes aligned

Содержание MIS Multi-Reference

















































Отзывы:

Нет отзывов