14
MicroPro
©
gbo Medizintechnik AG
Version 1.4
3.3 Transport of the unit
Measures concerning the transport of the unit from the manufacturer to the operator are
based on the individual circumstances and are defined in the general terms of business.
In the transport position, the support arm points vertically upwards. Radiator and radiator
cable may be mounted in the transport position.
In the event of subsequent transport of the unit, the dealer or the operator is responsible for
the unit and for compliance with the safety and accident prevention regulations.
3.4 Unpacking the unit
The unit is generally delivered with the packaging material supplied by the manufacturer.
Since the unit weighs approximately 44 kg without support arm, radiator and radiator cable,
it must be unpacked by at least two persons.
Proceed as follows:
•
Position the transport packaging so that the arrow mark is pointing upward.
•
Remove the safety bands from the transport packaging.
•
Remove the transport packaging upward.
•
Remove the remaining foam material.
•
At least two people should lift the device out of the lower part of the packaging using
the two handles.
3.5 Receiving inspection
Perform the following steps directly after unpacking the device:
•
Verify the delivery documents to make sure that the delivery is complete.
•
Check all components (device, external components and accessories) for possible
damage due to transport and defects.
In case of damage from the transport, report to the forwarding company and the distributor.
Do not put the device into operation if it is damaged.
Warning!
In case of damage from transport that could endanger personal safety, the
unit must not be connected to the power supply!
