Zimmer EB5000 Series, Инструкция по установке и эксплуатации

Страница: 11 / 20

11
10 Installation
WARNING
Risk of injury due to uncontrolled movements
Risk of injury in case of unexpected movement of the machine or system into which the product is to be installed.
►
Switch off the energy supply of the machine before any work.
►
Secure the power supply against being switched on unintentionally.
► Check the machine for any residual energy that may be present.
CAUTION
Risk of injury due to uncontrolled movements
Risk of injury in the event of uncontrolled movement of the product when the power supply is connected.
► Switch off the power supply to the machine before carrying out any work.
►
Secure the power supply against being switched on unintentionally.
►
Check the machine for any residual energy that may be present.
CAUTION
Risk of injury due to objects being ejected
Spring-loaded components can jump out when installing or uninstalling the device.
NOTICE
► Installation may only be carried out by qualified personnel in accordance with these installation and operating
instructions.
►
Switch off the power supply before any assembly, installation or maintenance work.
INFORMATION
► Observe the tightening torque of the mounting screws.
►
Verify the permitted load capacity of the required screw connections in accordance with VDI 2230.
Further installation information:
• Mounting screws are included in the scope of delivery.
• Strength class of the mounting screws is at least 8.8 (DIN EN ISO 4762)
The product can be installed flexibly and quickly. The numbering of the detent notches enables the gripper finger position
to be configured securely.
INSTALLATION AND OPERATING INSTRUCTIONS: EB5000
DDOC00206 / g
EN / 2022-10-01
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com