background image

Universal Clamp—Surgical Technique Guide 

21

•    

Additional fixation is required at the cephalad and caudal 

ends of the construct in scoliosis surgery, especially in 
case of obesity, extreme kyphosis or muscular weakness, 
except where additional fixation would increase the risk 
to the patient.

•    

If any implant or instrument comes in contact  

with a non-sterile surface it should not be used.

Postoperative

•    

Adequately instruct the patient. Postoperative care and 

the patient’s ability and willingness to follow instructions 
are one of the most important aspects of successful 
bone healing. The patient must be made aware of the 
limitations of the implant and that physical activity and 
full weight bearing have been implicated in fracture. 
The patient should understand that an implant is  
not as strong as normal, healthy bone and will  
fracture if excessive demands are placed on it in 
the absence of complete bone healing. An active, 
debilitated, or demented patient who cannot properly 
use weight-supporting devices may be particularly  
at risk during postoperative rehabilitation.

Adverse Effects 

Complications and adverse reactions have been reported  
with the use of similar spinal instrumentation systems.  
These adverse effects, including the possibility of death, 
should be discussed with the patient prior to surgery.

Additional surgery may be required to correct any of these 
potential adverse effects.

1.

 Non-union, delayed union.

2.

 Disassembly, fraying, kinking, loosening, bending  

or breakage of any or all of the Universal Clamp System 
implant components.

3.

 Metal sensitivity, polyester sensitivity or allergic reaction 

to a foreign body.

4.

   Infection.

5.

  Foreign body reaction to the implants including possible 

tumor formation.

6.

  Pain, discomfort, or abnormal sensations due to the 

presence of the device.

7.

 Pressure on the skin from component parts, where there 

is inadequate tissue coverage over the implant causing 
skin irritation.

8.

 Loss of proper spinal curvature, correction height  

and/or reduction.

9.

 Implants cutting through soft osteoporotic, osteopenic  

or cancellous bone.

10.

 Bone forming around the implant making removal 

difficult or impossible.

11.

 Cessation of growth in the operated portion of bone.

12.

 Decrease in bone density due to stress shielding.

13.

 Vascular and/or nerve damage due to surgical trauma 

or presence of the device. Neurological difficulties 
including bowel and/or bladder dysfunction, impotence, 
retrograde ejaculation, and paraesthesia.

14.

 Bursitis.

15.

 Dural leak. 

16.

 Paralysis.

17.

 Death.

18.

 Erosion of blood vessels due to the proximity of the device, 

leading to hemorrhage and/or death.

Magnetic Resonance Imaging (MRI)  
Safety and Compatibility 

The Universal Clamp System has not been evaluated for 
safety and compatibility in the MR (Magnetic Resonance) 
environment. The Universal Clamp System has not been 
tested for heating or migration in the MR environment.

In the event of exposure to foreseeable environmental 
conditions such as magnetic fields the user and/or patient 
should be informed of the following:

Precautions

•    

This device has not been evaluated for safety and 
compatibility in the MR environment.

•    

This device has not been tested for heating or migration 
in the MR environment.

•    

There is a potential for heating and migration in the  
MR environment.

•    

There is the potential for metal implants to create MR 
imaging artifacts in the vicinity of the implant.

Содержание Universal Clamp

























Отзывы: