ZiLOG Z80 series, Руководство пользователя

Страница: 6 / 34

5
What You Need
The following components are required to assemble the module. Header pins JP1
and JP2, and P1 to P4 may need to be cut from longer strips.
Image Qty Reference Description
1
PCB Printed circuit board SC103 Z80 PIO
4
C1, 2, 3, 4 Capacitor 100nF, ceramic, lead spacing = 2.54mm
1
C5 Capacitor 100uF, electrolytic, lead spacing =
2.54mm (radial) or 14mm (axial)
1
JP1 and JP2 Pin header, male, 2 rows x 2 pins, straight
2
JP1 and JP2 Jumper shunt for pin spacing = 2.54mm
1
P1 Pin header, male, 2 rows x 39 pins, angled (2nd
row optional)
1
P2 Pin header, male, 2 rows x 13 pins, angled
1
P3 Pin header, male, 1 row x 29 pins, angled
1
P4 Pin header, male, 1 row x 2 pins, angled
1
RP1 Resistor pack 8x10k, SIL, 9-pin
1
SW1 DIP switch, 6 way, piano style
1
U1 74HCT688, 8-bit identity comparator, PDIP 20
1
U1 socket 20 pin PDIP IC socket 0.3" wide