ZiLOG Z8 PLUS Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 152

ZiLOG Z8 PLUS Скачать руководство пользователя страница 3

© 1999 by ZiLOG, Inc. All rights reserved. No part of this document may be copied or reproduced in any
form or by any means without the prior written consent of ZiLOG, Inc. The information in this document is
subject to change without notice. Devices sold by ZiLOG, Inc. are covered by warranty and patent
indemnification provisions appearing in ZiLOG, Inc. Terms and Conditions of Sale only.

ZiLOG, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set
forth herein or regarding the freedom of the described devices from intellectual property infringement.
ZiLOG, Inc. makes no warranty of merchantability or fitness for any purpose.

The software described herein is provided on an as-is basis and without warranty. ZiLOG accepts no liability
for incidental or consequential damages arising from use of the software.

ZiLOG, Inc. shall not be responsible for any errors that may appear in this document. ZiLOG, Inc. makes no
commitment to update or keep current the information contained in this document.

ZiLOG's products are not authorized for use as critical components in life support devices or systems unless
a specific written agreement pertaining to such intended use is executed between the customer and ZiLOG
prior to use. Life support devices or systems are those which are intended for surgical implantation into the
body, or which sustains life whose failure to perform, when properly used in accordance with instructions for
use provided in the labeling, can be reasonably expected to result in significant injury to the user.

=L/2*

, Inc.

910 East Hamilton Ave., Suite 110
Campbell, CA 95008
Telephone: (408) 558-8500
FAX: (408) 558-8300
Internet: http://www.zilog.com

«
1
2
3
4
5
...
»

Содержание Z8 PLUS

























































































































































Отзывы:

Нет отзывов