Z8ENCORE000ZAC
Z8 Encore!
®
Smart Cable
UM016207-0508
Page 2 of 6
Voltage and Current Requirements
The voltage and current requirements of the Z8 Encore!
®
Serial Smart Cable include:
•
System Clock: 153.6 kHz minimum, 20 MHz maximum
•
Power Supply: 3.0 V minimum, 3.6 V maximum
•
Current: 35 mA at 3.3 V
Connecting the Z8 Encore! Smart Cable to Your Computer
Connect the Z8 Encore!
Smart Cable to a COM port on your computer using the 9-pin DB
serial connector (see
Figure 2
).
Figure 2. Connecting the Z8 Encore! Smart Cable to Your Computer
Connecting the Smart Cable to Your Development Board
To use the Z8 Encore!
Smart Cable, connect the application board to the Smart Cable 6-pin
DBG connector. Ensure that Pin 1 of the application lines up with Pin 1 of the DBG
connector, indicated by the horizontal/vertical groove over the Pin 1 placement (see
Figure 3
on page 3). For more information on interfacing the Smart Cable to your target
board, refer to
Z8 Encore!
®
Design for Debug Technical Note (TN0036)
.
Power Supply
Development Board
Host PC
Serial Port
Smart Cable
(Not included)
(Not included)
(Not included)
