Z183 EMAC Board
User Manual
1
UM008301-0401
Introduction
The Z183 Ethernet Media Access Controller (EMAC) board is a compact
9 x 8cm printed circuit board assembly that is designed to be used with the
Z183 evaluation board. It has an RJ-45 jack that allows you to connect to a
standard 10 Base-T hub for testing purposes.
Kit Contents
The Z183 EMAC kit contains the following items. If you did not receive one of
these items, contact your local sales office.
•
One EMAC board labeled
10 Base-T interface
•
Interrupt wiring cable assembly
•
Z183 EMAC Board User Manual
Configuring the Z183 Evaluation Board
To configure the Z183 board to be used with the EMAC board, follow these
steps:
1. Power up the Z183 board by connecting the external 9V power supply.
2. Use the serial cable to connect the DB9 serial connector on the Z183 board
to the serial port of your PC.
3. Open the Hyperterminal application on your PC and the Connection
Description window appears.
Note: If you have a DB25 connector on your PC, you must purchase a DB25-DB9 adapter.
