UM026803-0816
Start the S3F8S19 Ledblink Sample Program
S3F8S19 Development Kit
User Manual
8
4. From the
Build
menu, select
Set Active Configuration
to open the Select Configura-
tion dialog box.
5. Select
Debug
, then click
OK
to close the Select Configuration dialog box.
6. From the
Project
menu in ZDS II, select
Settings
to open the Project Settings dialog
box. In the Project Settings dialog box, click the
Debugger
tab.
7. On the Debugger page, select
S3F8S1X_FlashIspII
from the Target list, then select
S3FlashIspII
from the
Debug Tool
drop-down menu, as indicated in Figure 9.
Figure 9. Select the Target and Debug Tool