2.3.5. Offset Mode [RED]
Offset :
By default this mode repeats the pattern across the ZLHoop. You can also set the pattern to show
up only 3 times around the hoop and it will automatically center it leaving LEDS turned off between the
patterns.
There are 4 Options here use the same Offset button to choose one of 4 options
Use the Arrows Left Right to offset the pattern on the hoop.
If you choose option 4: You can select to print the pattern only 3 times on the hoop or how many times you
wish. To fill the LEDS that are turned off use the Numeric Keypad to choose a color.
Only your Pattern will Play, the color you chose will remain in place, creating a marquee type of pattern.
Important: This mode does not reset by itself so make sure option 1 is selected to have patterns display on
entire hoop.
Option 1 is indicated by 3 white LEDS next to the MODE Leds.
Zillion Lights LLC
ZLHOOP USER GUIDE - 1
© 2017. All rights reserved. Designed by: Zillion Lights LLC/ZLHulahoops ZLHulaHoop® is a trademark of
Zillion Lights, LLC. | ZLHoop® is a trademark of Zillion Lights, LLC.
Page 30 of 97
