STANDBY MODE this is the
Home display of the ZL Hoop
,
it shows your battery life, Serial Number,
Shows what Shuffle Mode is active and for Gen 2 shows if Smart Mode is On/Off
. You always need to be in
this Mode to enter into any other Mode.
GREEN MODES which are SFX added to patterns can be
turned On/Off
.
Example turning on Strobe Mode
will make every pattern Strobe in the selected color.
RED MODES are
always ON
or
Active
as they are required for Each Pattern to Play.
Example choosing a
different group to shuffle on from the Pattern Vault.
ZL SHOW MODE when
turned OFF shuffles only on the Selected Group and Pattern within that
Group*_, When *turned ON
allows you to setup options on how to
shuffle the groups
, it is also used to
shuffle your presets and to Save/Delete your saved presets Slots(25)
Note: You can’t enter into other modes when you are not in Standby. Always exit the
chosen mode by pressing OK and this will return back to Standby Mode and save all
your settings.
!
MODES
When you are in a
Mode
you Select an
Option
and
Settings for that Option
Example: In
Color Wheel Mode
you Select
Option 1: Use Single Color Wheel
, Then this
Option
has
9 Settings*(Set to use *Color Wheel 1
, or 2, or 3 and so on)
Then
Exit Mode
to
Save your Selection
*
Zillion Lights LLC
ZLHOOP USER GUIDE - 1
© 2017. All rights reserved. Designed by: Zillion Lights LLC/ZLHulahoops ZLHulaHoop® is a trademark of
Zillion Lights, LLC. | ZLHoop® is a trademark of Zillion Lights, LLC.
Page 12 of 97
