Zigmund & Shtain CZ5702733, Инструкция по эксплуатации

Страница: 6 / 14

4
have set the power, press to turn on the
double ring (2.5.1).
Recommendation: The light is so bright on
models with halogen rings that we advise you
not to look directly at a lit ring with no pan on.
TIME FUNCTIONS
2.6 Selecting time
Models a, c, d: Once the hob is on and
the power is set, you have 5 seconds
of flashing numbers to press the
key (2.6.1). Select the necessary time
by pressing , keys (2.6.2). In five
seconds the time will be set and visible,
and an illuminated dot will appear under
the programmed ring icon (2.6.3). To alter
the time or see the remaining time press
the programmed ring icon (2.6.4). To
cancel the program press the , keys
simultaneously (2.6.5).
Models b: Once a ring has been turned
on and the power set, press the key on
the clock.
00
and the sign will appear
on each ring (2.6.6). Press of the ring to
be programmed, and will start flashing
(2.6.7). Select the time using , on
the clock (2.6.8). In five seconds the time
will be set and alternating power value
will be displayed on the programmed ring.
Once the time has passed, you will hear a
beep and
00
will start flashing. To cancel
the program press on the icon and
hold it until
00
appears.
Note: The timer will automatically go out
if selecting the time takes more than 10
seconds.
Considerations on programming: If the
power level is 9, the maximum programming
time must be 60 min. Otherwise the maximum
value can be 99 min.
Once the time has passed, you will hear a
beep unless you press any key.
PROGRAMMING FUNCTIONS
2.7 Fast heating. Reaches the maximum
temperature quickly to automatically
proceed to constant cooking temperature.
Models b, d: Select a ring and turn it on to
the maximum power by pressing until 9
and the sign appear (2.7.1). Adjust the
power by pressing . The recommended
levels are 3 to 6 (2.7.2). In 5 seconds, fast
heating will be set and the power value
will be displayed followed by a dot (2.7.3).
Once the maximum temperature has been
reached, the digital dot will disappear and
the ring will continue working in the normal
mode. To stop press the programmed ring
key and select a new power setting.
2.8 Turning off a ring. Select
0
for the power
of the ring to turn off.
2.9 Residual heat . After you finish using the
hob, the rings will remain hot for some
time which will vary according to the power
selected, and the sign or a dot will be
displayed on the rings that are still hot. Do
not touch these rings to avoid burns.
Caution: Should the power supply be cut off
and then resumed, the indicator will not
appear even though the cooking zone is still
hot. Please bear this in mind.
2.10 Locking function.
Models b, d: To prevent children from
using the hob. Press and hold the key
for 3 seconds. This will activate the lock.
Repeat this procedure to unlock the hob
(2.10.1) .
Models a, c: This function prevents
accidental switching of the appliance. Hold
down the keys of heating elements 1 and 2 (
) simultaneously to lock or unlock the hob
controls (2.10.2).
If the hob is locked, will appear on the
display after pressing any key (2.10.3). is
displayed when it’s unlocked (2.10.4).
USER SETTINGS
2.11 Silent mode . To limit the number of beeps
(so that they are only heard when the ap-
pliance is turned on or off and for the timer
alarm), simultaneously press the keys
and , and then with the hob turned off.
On the sound settings screen, select and
to activate or deactivate silent mode (
: activated sounds (2.11.1), : silent mode
(2.11.2).
2.12 Activation of the automatic locking
system. With the hob turned off, simultane-
ously press the keys and , and then
. Once inside the automatic locking func-
e n g l i s h