Zigen ZIG-PHASED, Руководство пользователя

Страница: 7 / 19

7 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021 © 2021 Zigen Corporation
www.zigencorp.com
Z
IG
-P
HA
S
E
D
Us
er Ma
nu
a
l
2 Front Panel
The ZIG-
PHASED uses pushbuttons with LEDs to configure the unit’s Video mode, HDR support, Audio
Format mode, and Audio Source selection. Repeated pressing of the pushbutton cycles through the
modes. Refer to the table printed on the top of the unit to determine the selected modes.
Video Mode Selection
The Video Selection has one pushbutton and four LED mode indicators. Pressing the pushbutton will
cycle through the different modes. Below is the Video Selection mode table:
Video Mode Function
0 0 0 1 Auto – Use EDID from the sink with the lowest native resolution. This will ensure that
video will always be displayed on both HDMI outputs in mixed resolution
environments.
0 0 1 0 1080p60 – Source EDID set for 1080p60.
0 0 1 1 2160p30 – Source EDID set for 2160p30.
0 1 0 0 2160p60 – Source EDID set for 2160p60.
0 1 0 1 EDID OUT 1 – Source EDID from connected sink on HDMI Output 1.
0 1 1 0 EDID OUT 2 – Source EDID from connected sink on HDMI Output 2.
0 1 1 1 Stored EDID 1 – Use memorized EDID 1.
Note: Press and hold the Audio SRC pushbutton to permanently store the EDID from
the connected sink on HDMI Output 1.
1 0 0 0 Stored EDID 2 – Use memorized EDID 2.
Note: Press and hold the Audio SRC pushbutton to permanently store the EDID from
the connected sink on HDMI Output 2.
1 0 0 1 Checkerboard – Test Signal Output, Black and White Checkerboard.
1 0 1 0 Ramp – Test Signal Output, Black to White Ramp.
1 0 1 1 Red Ramp – Test Signal Output, Black to Red Ramp.
1 1 0 0 Green Ramp – Test Signal Output, Black to Green Ramp.
1 1 0 1 Blue Ramp – Test Signal Output, Black to Blue Ramp.
1 1 1 0 White – Test Signal Output, White Field.
1 1 1 1 PRBS – Test Signal Output, Pseudo Random Bit Stream.
1
1
2
3
4
5 6
Front Panel