8 of 28
IP-LOGIC AV over IP Technical Manual
TM-003-0001-100-00 | July 15, 2019
© 2019 Zigen Corporation
www.zigencorp.com
ZIG-IPPro-RX decode network packet streams over the 10G IP Network and convert the signals
up to live HDMI 2.0. A single 10G copper RJ-45 connector or optical connector (10G SFP+ Modules
sold separately) are used to receive the network packets. The HDCP 1.4/2.2 supported HDMI
output is connected to displays such as TVs, projectors, monitors, and HDMI Audio Processors.
ZIG-IPPro-RX can upscale or downscale an incoming stream. Frame rate conversion and color-
space conversion is also supported to optimize the HDMI video to the recommended video
format of the display.
Audio Return Channel (ARC) and Optical Audio TOSLINK are included for streaming over IP
Network. These streamed audio channels will be received by selected ZIG-IPPro-TX to be played
out on its respective analog audio connectors.
Features of IP-Logic Series
Features
ZIG-IPPRO-TX/RX
HDMI 2.0
✓
HDCP 1.4/2.2/2.3
✓
Maximum resolution
4K UHD/DCI
Maximum 4K Framerate
60fps 4:4:4
Video Compression
SDVoE (1.4:1 artifact-free when exceeding 10G)
Audio Compression
SDVoE (Lossless)
Audio Network Transport
AES67 and ST2110-30/31
Audio Discovery and Registration
Dante/SAP, RAVENNA, Ethernet AVB
Scaling
✓
Single-Frame Switching
✓
Video Wall
✓
Bezel Correction
✓
Multiview
✓
Color-Space-Conversion
✓
Chroma Sub-Sampling
✓
Frame-Rate Conversion
✓
Multichannel Audio Downmixing
✓
Latency
< 120ms (Genlock mode)
Unbalanced Analog Audio Output
TX
Audio Delay
✓
Auto Discovery (IP)
✓
Auto IP
✓
Dolby Vision, HDR10+, HDR10, HLG
✓
Preview Thumbnail streams
✓
CEC
✓
ARC
✓
EDID Management
✓
Overview
