Matrix Switcher Series
—
User Manual
28
6.6.4 DIP Switcher 8 Pins
Figure 6-20 DIP Switchers
A. DIP Switcher Pin 1 to 5:
Switch to down (ON) is specified for
“0”
, on the other hand
to up (OFF) be specified for
“1”
. For Device ID settings refer to
6.6.6 Device ID Settings.
B. DIP Switcher Pin 6:
Mater/Slave
Enable/Disable. Only one Matrix Switcher can be
connected to other device and control PC via RS-232/LAN that is specified as Master,
others are specified as Slave.
ON: RS-485 Serial Master and RS-232 / LAN Enable.
OFF: RS-485 Serial Slave and RS-232 / LAN Disable.
C. DIP Switcher Pin 7:
Switch between RS-232 port and LAN port connection.
ON: RS-232
OFF: LAN
D. DIP Switcher Pin 8:
Reset the web server IP address to
192.168.0.3
The steps are as below:
1. Please adjust the pin8 to ON
and re-start the Matrix Switcher.
2. After the Matrix Switcher re-starts about 10 seconds, shut down it.
3. For a normal operation, please adjust the pin8 to OFF, then power on the Matrix
Switcher again. The IP address will be restored to the default value:
192.168.0.3
6.6.5 DIP Switcher 2 Pins
Figure 6-21 RS-485 Terminal Switchers
DIP Switch RS-485 Terminator:
RS-485 Terminator for ON/OFF
ON:
RS-485 Terminator ON.
OFF:
RS-485 Terminator OFF.
Proceed Multi Matrix Switcher connections, the RS-485 Terminator for the last device