TR800Web
12280-0755-01
Seite
6 / 8
www.ziehl.de
Start web browser and enter the IP address (10.10.10.10) in the address line [Return]
The TR800Web homepage opens in the web browser
Close the login window with the OK button (without user name and without password)
Make the basic network settings
Push the slide switch to IP USER (sketch Point 8.8)
Requires a reboot of webserver (press RESET button), in the digital display
boot
flashes
(start duration ca. 1-2 minutes
Note: The settings made in the web browser under "Network" are only effective after the slide switch
is switched to IP User and the unit has been rebooted (press RESET button).
6.1.2.1
UPnP
Available for Windows starting from Win XP
Note: not available if the http port has been switched off
Start network browser (network environment),
("Symbols for show Network UPnP devices" must be active)
Double click on the device found
The TR800Web homepage opens in the web browser
Close the login window with the OK button (without user name and without password)
6.2 Information about the login window
Closing the login window (click on OK button) is delayed a couple of seconds as data still needs to be
transmitted in the background.
If the user admin/access control is inactive (default) the login window is not visible.
The user management/access control is always deactivated if the slide switch is set to IP=10.10.10.10
(see Points 4.1 and 6.1.2).
If the user admin/access control is active (see Point 8.15), the Username and Password must be entered.
Entry is case-sensitive.
Guest access (if activated, see Point 8.15) is made by logging in without any user name and password.
Guests can only view the "Measurements" and "Sensors" web pages. It is not possible to change the
parameters.
