MSR820V
12400-0701-00
Page
7 / 10
www.ziehl.de
9.3 Configuration of device functions and factory reset
•
Switch off the device
•
Press and hold reset button
•
Switch on the device
•
After 2s, all LEDs flash for 2s
o
Factory reset, all functions have been reset to factory settings
•
Continue to press and hold the reset button
•
After 10s all LEDs turn off (except for LED T1 green), configure device according to table…
green T1 red
Function ext. Reset
Button
X
N/O contact *)
Reset
X
N/C contact
Reset
Sensor
green T2
red
Relay function
X
K1, K2 Quiescent current *)
Reset
X
K1, K2 Working current
Reset
X
X
K1 quiescent current, K2 working current
Reset
Sensor
green T3
red
Zero-voltage safe restart interlock
X
Off *)
Reset
X
On
Reset
Sensor
green T4
red
Short-circuit monitoring
X
Off *)
Reset
X
On, Message to K1 and K2
Reset
X
X
On, Message to K2
Reset
Sensor
Exit configuration, restart the device
*) Factory setting
9.4 Display of the configuration settings
•
Press and hold the reset button for ≥ 10s
o
Mains LED flashes
o
LEDs T1, T2, T3 and T4 indicate the status of the configuration settings (see table above)
•
Release reset button to end the status display
•
