"
If necessary, the ends can be secured with a strip of insulation tape. The tape is self-bonding; the
overlap causes the layers of the tape to join.
6.3
Connecting connecting cables on the retro
fi
t kit
6.3.1
Replacement of the connector on the X-K connecting lead
Before connection to the retro
fi
t kit, the connector on the X-K connecting cable must be replaced.
"
Open the socket for the X-K connector by pressing the two tabs (1) on the sides of the socket
outwards with a screwdriver.
"
Loosen the screws for the strain relief (2).
1
2
"
Remove the X-K connector socket.
"
Using a side cutter, remove the cable protection on the X-K connecting lead.
Technical Information
Electrical installation
R-TIA19_02-D-GB 1942
Part.-No. 00163469-D-GB
11/26
