ZAmon STICK
Compliance with the following instructions is mandatory to ensure the functionality and
safety of the product. If the following instructions given especially but not limited for general
safety, transport, storage, mounting, operating conditions, start-up, maintenance, repair,
cleaning and disposal / recycling are not observed, the product may not operate safely and
may cause a hazard to the life and limb of users and third parties.
Deviations from the following requirements may therefore lead both to the loss of the
statutory material defect liability rights and to the liability of the buyer for the product that has
become unsafe due to the deviation from the speci
fi
cations.
General description
The frequency inverters ZAdyn4C, ZAdynpro or ZAdyn4B can be operated by the app-
software ZAmon, that is installed on a smartphone or a tablet. The smartphone or tablet
communicates with the frequency inverter via a
Bluetooth
®
-radio connection. For the
communication, the Bluetooth adapter "ZAmon STICK" is necessary, that is connected to
the frequency inverter.
Intended use
The ZAmon STICK is used to establish a
Bluetooth
®
-radio connection between a smart-
phone or a tablet and the frequency inverters ZAdyn4C, ZAdynpro or ZAdyn4B.
Using in Europe
ZAmon STICK complies with the Radio Equipment Directive (2014/53/EU [RED]).
Scope of delivery
1x ZAmon STICK
1x CAT5 network cable 0,50 m
R-TBA19_01-D-GB 1930
Part.-No. 00163467-D-GB
english
