ZIEHL-ABEGG ZAdyn4, Оригинальная инструкция по эксплуатации

Страница: 20 / 44

5.10 Digital inputs (X-IN)
5.10.1 Connection with external power supply
X-IN
+24V
+24V
_IN
I01 I02 I03 I04 I05 I06 I07 I08
GND
_IN
GND
8* 7* 6* 5* 4* 3* 2* 1*
1* 9* 8* 7* 6* 5* 4* 3* 2*
9*
10*
+24V
0V
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1
10*
Connection of digital input with external power supply
1 Modulation
() terminal designation of connector
* Wire number of the pre-assembled connecting lead X-I
Information
When using the external power supply the bridges between the ter24V / +24V_IN and
GND / GND_IN the pre-assembled control cable X-I are not required. These must be removed!
5.10.2 Connection with internal power supply
X-IN +24V
+24V
_IN
I01 I02 I03 I04 I05 I06 I07 I08
GND
_IN
GND
2* 9* 8* 7* 6* 5* 4* 3*
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1
8* 7* 6* 5* 4* 3* 2* 1* 9*
1*
10*
Connection of digital input with internal power supply
1 Modulation
() terminal designation of connector
* Wire number of the pre-assembled connecting lead X-I
Information
When using the internal power supply a bridge must be inserted between the terminals
+24V / +24V_IN and between GND / GND_IN. These bridges are already integrated into the pre-
assembled X-I cable.
The cable GND_IN (wire no.10) is not required. This must be removed from the connection
terminal both on the converter side and the control side and insulated.
CAUTION!
Attention!
The internal 24 V power supply is provided solely for the digital inputs. Switching consumer load with
this voltage is prohibited!
Original operating instructions
ZAdyn4C MRL
Electrical installation
R-TBA14_01-GB 1845 Part.-No. 00163419-GB
20/44