background image

1

General notes

1.1

Meaning

These description is valid only in combination with operating instructions of the used devices. 
The remarks concerning safety, installation and connection described in those operating 
instructions must be followed!
Before installation and start-up, read this documentation carefully to ensure correct use!

2

Safety instructions

Mounting, electrical connection, and start-up operation may only be carried out by an 
electrical specialist in accordance with electrotechnical regulations (e.g. DIN EN 50110 or 
DIN EN 60204)!

It is strictly forbidden for work to be carried out on any components while they are con-
nected to live voltage. The open equipment is protected to IP00. It is possible to come into 
direct contact with dangerous voltages!

3

General description

3.1

Application

This connection box can only be used in conjunction with ZIEHL-ABEGG ECblue fans with motor size 
B (IP20).

3.2

Function

ECblue fans combined with the ECblue (LON) connection box provide the following functions:

The connection box can be used to communicate with the fan controller. 

ECblue fans can be integrated into existing LON

®

 networks.

A LON

®

 network of several ECblue fans can be built up. The communication between the fans 

happens via LONWORKS

®

TP/FT10.

3.3

Transport

The device is packed ex factory to suit the transport method previously agreed.

Always use the original packaging materials when transporting the device.

Avoid shocks and impacts to the device during the transport.

During manual handling the human lifting and carrying restrictions must be observed and adhered 
to.

3.4

Storage

The device must be stored in its original packaging in a dry and weather-proof room.

Avoid exposure to extreme heat and cold.

Avoid over-long storage periods (we recommend a maximum of one year).

3.5

Disposal / recycling

Disposal must be carried out professionally and in an environmentally friendly way in accordance with 
the respective national legal stipulations.

"

Separate the materials by type and in an environmentally friendly way.

"

If necessary, commission a specialist company with the waste disposal.

Operating Instructions 

Connection box ECblue (LON)

General notes

L-BAL-E268-GB 1630 Index 003

Part.-No. 

2/10

Содержание ECblue











Отзывы: